However, bricks alone do not hold a masonry wall together. The mortar joints surrounding them play an equally important role. These joints help support the brickwork, manage moisture and protect the exterior wall from changing weather conditions.

Over time, mortar can crack, crumble or separate from the bricks. When this happens, professional brick pointing may be needed to remove the deteriorated mortar and replace it with a suitable new mixture.

Recognising the early warning signs can help NYC property owners address small masonry problems before they develop into extensive façade repairs.

What Is Brick Pointing?

Brick pointing, also commonly called brick repointing, is the process of repairing deteriorated mortar joints between bricks.

During the process, damaged or loose mortar is carefully removed to an appropriate depth. The joints are then cleaned and filled with new mortar that is selected to suit the age, condition and type of brickwork.

The purpose is not simply to improve the wall’s appearance. Proper brick pointing helps:

• Reduce water penetration
• Restore weakened mortar joints
• Protect surrounding bricks
• Improve the condition of the façade
• Extend the useful life of masonry walls

Mortar is especially important in older masonry because it often acts as the more replaceable part of the wall, helping moisture move through the joints rather than damaging the bricks themselves.

1. Crumbling or Powdery Mortar

One of the clearest signs that your building may need brick pointing is mortar that has started to crumble.

Run your finger gently across an accessible mortar joint. If the surface turns into powder, breaks away easily or feels sandy, the mortar may no longer be providing adequate protection.

Deterioration can occur because of age, prolonged moisture exposure, poor-quality previous repairs or repeated freeze-and-thaw cycles. As the joints weaken, they become less effective at keeping water out and supporting the surrounding masonry.

Crumbling mortar should not be ignored simply because the bricks still appear intact. The joints may continue to erode until gaps form between the bricks.

2. Visible Gaps Between Bricks

Mortar can gradually recede from the face of a wall, leaving deep or uneven gaps around individual bricks.

These recessed joints often collect water, dirt and ice. Once moisture enters the masonry, it can contribute to further deterioration during cold New York winters.

Open joints may appear in isolated sections at first, particularly around parapets, chimneys, window openings and areas exposed to heavy rainfall. Without repairs, the affected area can spread across a larger section of the façade.

Professional brick pointing fills these vulnerable joints and creates a more consistent exterior surface.

3. Cracks Along the Mortar Joints

Small cracks in mortar joints can be an early sign of masonry movement or material deterioration.

Cracks may appear horizontally, vertically or in a stair-step pattern. A stair-step crack follows the mortar joints around individual bricks and may require closer inspection to determine its cause.

The NYC Department of Buildings identifies several forms of masonry cracking, including separation between mortar and masonry units, horizontal cracking and stepped cracking along joints. Cracks can occur when stress within the masonry exceeds the resistance of the brick, mortar or both.

Brick pointing can repair certain mortar-joint cracks, but recurring, widening or extensive cracks should first be assessed by an appropriately qualified professional. Repointing alone will not correct an underlying structural or movement-related problem.

4. Water Stains on Interior Walls

A masonry problem may sometimes become noticeable inside the building before it is obvious outside.

Look for:

• Damp patches on exterior-facing walls
• Peeling paint
• Bubbling plaster
• Water stains near windows
• Musty smells
• Recurring moisture after rainfall

These signs do not automatically mean the mortar joints are responsible. Water can also enter through roofs, flashing, windows, parapets or damaged bricks.

However, open and deteriorated joints are a common route through which wind-driven rain can enter a masonry wall. A detailed exterior inspection can help identify whether brick pointing should form part of the repair plan.

5. Loose or Moving Bricks

Bricks should not feel loose or move when lightly touched.

Movement can indicate that the surrounding mortar has lost its bond or deteriorated to the point that it no longer holds the brick securely. Loose masonry can create a serious safety concern, particularly on upper storeys, parapets and walls above pedestrian areas.

The NYC Department of Buildings lists joint failure, cracked mortar, missing bricks and masonry instability among façade conditions that require attention.

Do not attempt to remove or reset loose exterior bricks without proper access, safety controls and professional assessment.

6. Mortar Is Missing in Certain Areas

Sections of missing mortar are an obvious sign that the joints need repair.

Missing material often appears around:

• Building corners
• Rooflines
• Chimneys
• Window lintels and sills
• Fire escapes
• Parapet walls
• Areas near downpipes
• Previously repaired sections

These locations may experience greater exposure to water, building movement or corrosion from nearby metal elements.

Spot pointing may be enough where deterioration is genuinely limited. However, if the mortar is failing across several elevations, broader repointing may offer a more consistent and long-lasting result.

7. Bricks Are Spalling or Flaking

Spalling occurs when the face of a brick begins to peel, chip or break away. In some cases, the brick may lose a significant portion of its outer surface.

Spalling can develop when moisture enters the masonry and expands during freezing conditions. It can also occur when previous repairs used mortar that was too hard or incompatible with the original bricks.

Applying a very strong cement-based mortar to softer historic brickwork can force moisture and stress into the bricks instead of allowing the joints to absorb them. This can contribute to cracked or damaged masonry units.

When spalling appears alongside hard, cracked or poorly matched mortar, both the joints and affected bricks should be inspected before repair work begins.

8. White Deposits on the Brick Surface

White, chalky deposits on masonry are commonly known as efflorescence.

Efflorescence forms when water moves through the masonry, dissolves natural salts and carries them to the surface. When the water evaporates, the salts remain behind.

A small amount of temporary efflorescence does not always indicate serious damage. Recurring or widespread deposits, however, may point to an ongoing moisture source.

Property owners should look beyond cleaning the visible staining. Deteriorated mortar joints, defective flashing, roof drainage problems and parapet damage may all need to be investigated.

9. Previous Pointing Repairs Are Cracking

Not every previous brick pointing job performs as intended.

Warning signs of poor or failing repairs include:

• Mortar smeared across brick faces
• Joints that are much harder than the bricks
• Wide, uneven or poorly shaped joints
• New mortar separating from old material
• Cracks developing shortly after repair
• Noticeably different colours across the wall
• Mortar applied only as a thin surface layer

A thin layer placed over weak mortar may temporarily improve the appearance, but it does not provide the same result as removing deteriorated material and properly refilling the joint.

On historic buildings, careless mortar removal can also chip brick edges or permanently widen the joints. NYC Landmarks Preservation Commission guidance stresses the importance of carefully removing deteriorated mortar without damaging the surrounding bricks.

10. The Façade Looks Uneven or Bulging

A wall that appears bowed, bulging or uneven may have a problem beyond routine mortar deterioration.

Bulging masonry can be connected to failed wall ties, corrosion, trapped moisture, movement or deterioration behind the visible brickwork. It should be treated as a potentially serious condition.

Do not assume that repointing the visible joints will make the wall safe. A qualified professional should first identify the underlying cause and determine the correct repair method.

Why Timely Brick Pointing Matters in NYC

New York buildings face demanding conditions throughout the year. Wind-driven rain, snow, freezing temperatures, summer heat, pollution and building movement can all affect exterior masonry.

Timely brick pointing helps close vulnerable joints before moisture reaches deeper parts of the wall. It can also help property owners avoid unnecessary brick replacement by protecting masonry that is still in serviceable condition.

For buildings higher than six storeys, NYC’s Façade Inspection and Safety Program requires exterior walls and related features to be inspected every five years by a Qualified Exterior Wall Inspector.

Smaller buildings also require regular maintenance, even when they are not covered by the same inspection programme. Property owners remain responsible for keeping their buildings safe and addressing hazardous exterior conditions.

Can Brick Pointing Be Completed at Any Time of Year?

Brick pointing should be carried out under suitable weather conditions.

Extreme heat, freezing temperatures, rain and strong winds can affect mortar curing and workmanship. Contractors may use protective coverings, controlled access equipment and other measures when conditions require them.

The correct timing depends on the type of mortar, location of the repairs, expected weather and overall project scope.

Choosing Brick Pointing Services in NYC

Brick pointing requires more than filling visible gaps with cement. The contractor should assess the existing bricks, mortar composition, joint depth, moisture conditions and access requirements before starting work.

When comparing brick pointing services in NYC, look for a contractor that can:

• Inspect the full affected area
• Identify the likely cause of deterioration
• Match the replacement mortar appropriately
• Protect brick edges during mortar removal
• Follow relevant NYC safety requirements
• Explain whether permits or professional filings are needed
• Provide a clear repair scope

Permit requirements can vary according to the scale and nature of the work. NYC rules distinguish between certain ordinary masonry repairs and work involving structural elements, new brickwork, flashing, anchors or other significant façade changes.

Final Thoughts

Crumbling mortar, open joints, water stains, stepped cracks and loose bricks are not merely cosmetic concerns. They may indicate that the masonry is losing an important layer of protection.

Inspecting the façade regularly and arranging repairs at the first clear signs of deterioration can help preserve the bricks, reduce moisture intrusion and prevent a small repair area from becoming a much larger project.

When your property shows signs of failing mortar, schedule an inspection with an experienced NYC masonry contractor. Professional brick pointing services can restore damaged joints, improve the appearance of the façade and help protect your building against New York’s demanding weather conditions.

FAQs

How do I know if my NYC building needs brick pointing?

Common signs include crumbling mortar, visible gaps between bricks, cracked joints, water stains, loose bricks and white deposits on the masonry. A professional inspection can confirm the extent of the deterioration.

What is the difference between brick pointing and brick repair?

Brick pointing focuses on removing and replacing damaged mortar joints. Brick repair may also include replacing cracked, spalled or loose bricks and correcting other masonry defects.

How long does brick pointing last?

A properly completed brick pointing project can last for many years. Its lifespan depends on the quality of workmanship, mortar compatibility, building exposure, drainage and ongoing maintenance.

Can damaged mortar cause water leaks?

Yes. Cracked, recessed or missing mortar can allow rainwater to enter the masonry wall. However, leaks may also come from roofs, flashing, windows, parapets or drainage issues, so the full exterior should be inspected.

Can I point over the existing mortar?

Applying a thin layer of new mortar over damaged joints is not considered a proper long-term repair. The deteriorated mortar usually needs to be removed to a suitable depth before the joints are refilled.

Is brick pointing necessary for older NYC buildings?

Older buildings often require brick pointing because mortar naturally deteriorates over time. Historic masonry may also need a softer and more compatible mortar to avoid damaging the original bricks.

How much does brick pointing cost in NYC?

The cost depends on the size of the repair area, building height, access requirements, mortar condition and whether bricks also need replacement. A site inspection is usually required for an accurate estimate.